Xhorse Dolphin XP005 + VVDI Key Tool Max Cut Honda HO01

Xhorse Dolphin XP005 VVDI Key Tool Max Cut Honda HO01

How to cut a Honda HO01 key blank by using Xhorse Dolphin XP005 + VVDI Key Tool Max? Here I have an original key, and will use it to show the procedure below.

 

Key Cutting

Install the original key on M2 clamp.

Control on VVDI Key Tool Max,

Find bitting >> Honda >> HON66 >> M2-A clamp tip align 2 position >> Decode key >> Continue

Xhorse Dolphin XP005 VVDI Key Tool Max Cut Honda HO01

Xhorse Dolphin XP005 VVDI Key Tool Max Cut Honda HO01

Xhorse Dolphin XP005 VVDI Key Tool Max Cut Honda HO01

 

Dolphin XP-005 Machine will start decoding automatically.

Just wait…

Decode key success.

 

Remove the working from clamp, fix the HO01 key blank instead.

Make sure it’s flat. Press

Cut >> Continue

 

Dolphin XP-005 machine starts cutting key…

Cutting key completed.

 

That’s just one side.

Repeat same operations for the other side. It’s easy and smart.

 

Take out the key to have a try after cutting was done.

It’s same as the original one.

(Note: the new key needs to debur right after cutting.)

Xhorse Dolphin XP005 VVDI Key Tool Max Cut Honda HO01

Xhorse Dolphin XP005 VVDI Key Tool Max Cut Honda HO01

 

Key Programming

Put the original working key into VVDI Key Tool Max coil.

Transponder clone >> Read transponder >> Clone >> Start clone >> 46 Transponder clone

 

Take out original key, put VVDI Super Chip into coil.

Copy successfully.

 

Now I should be able to use the key together with Super Chip to start the car.

Oh yes, it can successfully open the door and start car.

Perfectly done!

Xhorse Dolphin XP005 VVDI Key Tool Max Cut Honda HO01

Xhorse Dolphin XP005 VVDI Key Tool Max Cut Honda HO01

Xhorse Dolphin XP005 VVDI Key Tool Max Cut Honda HO01

www.xhorsestore.co.uk

(Visited 5 times, 1 visits today)