It is suggested to remove Xhorse Dolphin XP-007 Key Cutting Machine outer cover to take out the battery if having a problem of charging lights quick flashing. Sometime, the battery may be unable to charge due to misoperation.
By means of testing battery can help to solve the problem. At this time, it’s necessary to know how to remove Dolphin XP-007 cover.
Dolphin XP-007 battery is located downside of the cover. Known the disassembling sequence will help to do this job.
Dolphin XP-007 Disassembling Sequence
Step1. Loosen 4 screws to remove back handle.
Step2. Loosen 6 screws to remove back cover.
Step3. Loosen 4 screws to remove cover bracket.
Step4. Loosen 4 screws to remove protection cover.
Step5. Loosen 4 screws on motor bracket.
Step6. Remove 6&7 via rotating, otherwise, the motor bracket can’t be removed.
How to dismountDolphin XP-007 motor bracket?
Step1. Place machine flat.
Step2. Pull off the side handle to lock.
Step3-4. Remove cover bracket through loosing screws.
Step5. Pull up the side handle to unlock.
Step6. Rotate the wrench and remove the guide pin.
Step7-8. Remove motor bracket through loosing screws.
Done.
Now you can find the battery to have a test!
Xhorse Dolphin XP-007 disassemble video
https://www.youtube.com/watch?v=0ASz_Hhy79s
Xhorse Dolphin XP 007 disassemble and check the battery
https://www.youtube.com/watch?v=QoXWSeFiKgE
This is how to disassemble Dolphin XP-007 outer shell to check its battery.
More questions feel free to contact us.
https://www.xhorsestore.co.uk/