Here it’s going to show you some of the Xhorse solder-free adapters. These adapters work with the Xhorse VVDI Key Tool Plus and the new Xhorse VVDI MINI Prog. It’s hard to see in the frame but there’s several adapters that are available.
This set includes adapters for BMW, Porsche, LandRover, Volvo, and others:
BMW CAS3/CAS3+ adapter
BMW CAS4/CAS4+ adapter
BMW DB15-DB25 adapter (for EWS4 adapter only)
BMW ECU interface board kit
PORSCHE BCM IMMO Adapter
LANDROVER KVM IMMO Adapter
VOLVO KVM IMMO Adapter
VOLVO CEM-2 IMMO Adapter
VOLVO CEM-1 IMMO Adapter
Instrument Cluster Adapters (Honda Fit-H, Honda Fit-L, Kia K3, Kia K5, Hyundai Sonata)
VOLVO CEM-1 ADAPTER (XDNP28)
Good quality and rigid pins.
VOLVO CEM-2 ADAPTER (XDNP29)
Solder-free adapter for EEPROM reading using the Xhorse VVDI MINI Prog or Xhorse VVDI Key Tool Plus
LANDROVER KVM ADAPTER (XDNP16)
Also with fastening pieces.
VOLVO KVM ADAPTER (XDNP27)
Pins have very nice sharp points to pierce with.
BMW CAS3/CAS3+ ADAPTER (XDNP11)
We have some standoffs so that this board can be held down to the CAS module.
BMW CAS4/CAS4+ ADAPTER (XDNP12)
BMW FRM ADAPTER (XDNP18)
Again we have some standoffs.
PORSCHE BCM ADAPTER (XDNP17)
Using A HD-15 connector to connect like Xhorse VVDI MINI Prog.
D80/35080 ADAPTER (XDNP24)
A clamp adapter for the EEPROM within BMW clusters that holds mileage data.
EWS4 ADAPTER (XDNP14)
It’s going to connect the existing Xhorse EWS4 adapter. One side is connected to EWS4 adapter, the other side to Xhorse VVDI MINI Prog.
These above are the immobilizer adapters, but others marked as dash adapters that seems to be instrument cluster adapters I’m not sure about.
More functions to be explored next time!