Xhorse SW-007 Smart Remote Watch can be worked as VVDI Remotes to control your car like start engine, lock & unlock car doors, open & close trunk. It’s compatible with more than 30,000 car models. Following we’re going to program the smart watch on 2017 Alfa Romeo Giulia as an example.
What You Need
2017 Alfa Romeo Giulia
Procedure
Step1. Generate Xhorse Smart Watch Remote Control
Put the SW-007 smart watch into VVDI Key Tool Plus coil.
Remote program >> AlfaRomeo >> GIULIA >> GIULIA KeylessGo ID4A >> Generate
Burn success.
Step2. Read Password
Immo programming >> AlfaRomeo >> By model >> Immo system >> GIULIA >> 2015- >> Keyless Go >> Start programming >> Read PIN code
Please switch ignition on.
Pincode has been read out.
Step3. Check Number of Existing Keys
Go into “The number of smart keys”.
Current key number: 2
Step4. Program Xhorse Smart Watch
Press “Smart key adding”.
Switch ignition off, and turn on double flash lamps(security warning light). Press “OK”.
Please input 5-digit password.
The smart key sensing area is located in the middle armrest box, when prompted to press the remote after clicking “OK”, do not take out the sensing area, press remote in sensing area directly.
Please keep pressing and releasing the unlock button within 30s…
Programmed successfully.
Test the Xhorse Remote Watch, it can open trunk, unlock car and start engine normally.
Done.
