3 Key Types on XhorseKey Cutting Machine You Should Know

3Key Types on XhorseKey Cutting Machine You Should Know

There are 3 types of keys that can’t be cut directly with Xhorse Automatic Key Cutting Machine at present: plastic key, smeary key and aluminium key. That’s because the first step key learning is measured by electrical conductivity. Once the key does not have electroconductibility, it’s easy to cause broken probes when decoding key.

 

Locksmiths may pay attention to the problem If having one of following:

Dolphin XP-005, Dolphin II, Condor XC-Mini Plus II, Condor XC-Mini Plus

3Key Types on XhorseKey Cutting Machine You Should Know

 

3 types of keys including:

  1. Plastic Key

3Key Types on XhorseKey Cutting Machine You Should Know

 

  1. Smeary Key

3Key Types on XhorseKey Cutting Machine You Should Know

 

  1. Aluminum Key, the surface of aluminum is prone to forming aluminum oxide, which is insulative.

3Key Types on XhorseKey Cutting Machine You Should Know

 

TIPS

It’s recommended to use optical key bitting recognition with Xhrose Key Reader, manual key decoding or clean the stain(use sandpaper to sand the oxide layer) before key learning.

 

Good news is Xhorse has developed a key cutting machine with force sensor that can effectively solve the problem of broken probes caused by non-conductive keys. New machine is being tested and will be available in the future soon.

 

www.xhorsestore.co.uk

(Visited 18 times, 1 visits today)